TREE REMOVAL —
WE MATCH THE METHOD
TO THE JOB
We match the method to the tree. Feller buncher for efficient, controlled felling. Traditional climbers for precision in tight spots. CMC 72HD+ spider lift for aerial dismantling up to 72 ft. Fecon mulcher head for smaller trees — chips on-site.
THE RIGHT METHOD EVERY TIME
No two trees are the same. We use four different removal methods so the job is always done safely, efficiently, and on budget.
Feller Buncher
Baumalight FGS 952
Cuts and grabs trees up to 20" diameter cleanly at the base, controls the fall, and stacks for chipping — all from the operator cab.
When Equipment Can't
Traditional Climbers
Certified arborists ascending with ropes and rigging for precision removal in tight spaces, near structures, or on properties equipment can't access.
Spider Lift · Up to 72 ft
CMC 72HD+ Arbor Pro
Tracked aerial platform that fits through standard gates and reaches 72 ft — lets our crew dismantle large trees from above without a bucket truck.
Under 10" Diameter
Fecon Mulcher Head
Our tracked Fecon mulcher grinds trees under 10" diameter directly into chips on the ground — no felling, no stacking, no hauling.
Baumalight FGS 952 · Feller Buncher
CUTS UP TO 20" — IN FULL CONTROL
The Baumalight FGS 952 is a skid steer-mounted feller buncher — not a chainsaw, not a bucket truck, not hand labor. It's a commercial-grade machine built specifically to cut and grab trees at the base, control the fall, and stack them without the operator ever leaving the cab.
The 52" cutting disc spins at high RPM and passes through trunks up to 20 inches in diameter in one clean motion. As it cuts, the grabber arms clamp the trunk and hold it — preventing uncontrolled falls in any direction. The operator chooses exactly where the tree lands. It's fast, it's precise, and it eliminates much of the risk involved in traditional felling.
This is our primary tool for residential and commercial tree removal on properties with enough space to operate safely. It dramatically reduces the time — and cost — of removing multiple trees compared to doing it one chainsaw cut at a time.

Machine Specs
Baumalight FGS 952 — Key Specifications
Cutting Disc
52" diameter
Max Tree Diameter
Up to 20 inches
Teeth
18 × B8000 Beaver (4-edge, replaceable)
Throat Opening
36"
Hydraulic Flow
25–45 GPM
Blade Material
AR400 high-strength steel
Control
Electric-over-hydraulic, in-cab
Mount
Skid steer (12,000 lb min)

Traditional Climbers · When Equipment Can't Reach
PRECISION WHERE IT COUNTS
Heavy equipment isn't always the right answer. Some trees are surrounded by structures, fences, power lines, or landscaping that makes machine access impossible or too risky. That's when we send a climber — a certified arborist who goes up with ropes, rigging, and a chainsaw and takes the tree down piece by piece from the top.
Climbers give us full control over where each section of the tree falls. They can lower limbs and trunk sections with ropes and rigging blocks — no impact, no bounce, no guessing. It's more labor-intensive than running the FGS 952, but for the right situation, it's the only way to do the job safely.
We use climbers when:
CMC 72HD+ Arbor Pro · Spider Lift
72 FEET UP — THROUGH A STANDARD GATE
The CMC 72HD+ Arbor Pro is a tracked spider lift designed specifically for arborists. Unlike a bucket truck, it fits through a standard 36-inch gate, travels on rubber tracks that won't tear up your lawn, and sets up on four outrigger legs on uneven ground. From there it puts our crew at 72 feet with a 40-foot horizontal outreach.
For tree removal, the CMC is especially valuable when a tree needs to be dismantled from the top down — piece by piece — rather than felled at the base. The operator works from a stable, elevated platform to remove large limbs safely before the trunk comes down. It's faster and lower-risk than rope climbing for this type of work, and it can reach sections of a canopy that no ground-based equipment can touch.
It's also the right tool when a bucket truck simply can't get positioned — narrow driveways, tight back yards, or properties with overhead obstacles that prevent a large vehicle from maneuvering into place.
We use the CMC spider lift when:

Fecon Mulcher Head · Trees Under 10" Diameter
MULCH IT IN PLACE
For smaller trees — anything under 10 inches in diameter — our Fecon mulcher head skips the whole felling process entirely. It drives straight up to the tree and grinds it down, trunk first, turning the entire thing into fine chips right where it stands. There's no felling, no stacking, no chipping trailer, no hauling debris off-site.
The Fecon head is mounted on a tracked machine that can access steep terrain, narrow corridors, and overgrown areas that a wheeled skid steer can't navigate. It's the fastest, cleanest option for removing fence-line trees, clearing wooded lot edges, or knocking out a cluster of smaller trees before new construction or landscaping begins.
What the Fecon head handles:
Not Sure Which Method You Need?
Tell us about the tree — size, location, what's nearby — and we'll come out, take a look, and give you a straight quote. No pressure, no guesswork.
Get a Free QuoteLooking for tree removal specifically in Newnan, GA? See our dedicated pages: Tree Removal in Newnan, GA and Emergency Tree Removal in Newnan, GA.
Dealing with thick brush, saplings, and undergrowth rather than individual trees? Forestry mulching processes that vegetation on site.
GET A FREE QUOTE
Fill out the form with your details and we'll typically respond within 24 hours. Prefer to talk? Give us a call.
